Gear Pump

Product Details:

Model - FTSS
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTSS” which is self priming, foot mounting type positive displacement rotary gear pump. Model “FTSS” having all Stainless Steel (SS-316) in three piece construction with investment cast.Due to three piece construction, it can be easily cleanable and maintainable that is why it is highly used in all kind of food industries. These pumps have SS-316 Gear and shaft that are nitrated to give long life and trouble free performance. The shaft is supported on self lubricating type Teflon coated Bushes and the sealing is done with Teflon based “GFO” pack sealant which gives zero leakage. The right angle mounting brackets facilitates foot mounting of the pump on base plate with Electric Motor of appropriate ratings. These pumps have sturdy design and construction for long trouble free service.The suction and delivery connection are available in 1/4" to 2 ½" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.33 LPM to 300 LPM flow capacity and has suction lift of 1m to 5m at rated speed of 1440 RPM. These pumps are designed up to maximum Viscosity of 1,00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model – FTRN
Fluid Tech Systems offer “Rotofluid” make gear pump Model “FTRN/FTRB” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which it help to increase life and performance of pump. Model “FTRB” is a bush bearing type of pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty, however for continuous duty, needle roller bearing in Model “FTRN” and it will be selected for liquid having low viscosity, power lubricating values if liquid containing dirt or impurities pump will independently lubricated bearing should be selected in Model 'FTRX', liquid which tends to solidity at lower temperature the jacketing construction should be selected to facilitate the heating of the pump lay steam or thermic fluid etc.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 4" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 833.30 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model – FTRN

Fluid tech systems offer “rotofluid” make gear pump model “FTRN/FTRB” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which it help to increase life and performance of pump. Model “FTRB” is a bush bearing type of pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty, however for continuous duty, needle roller bearing in Model “FTRN” and it will be selected for liquid having low viscosity, power lubricating values if liquid containing dirt or impurities pump will independently lubricated bearing should be selected in Model 'FTRX', liquid which tends to solidity at lower temperature the jacketing construction should be selected to facilitate the heating of the pump lay steam or thermic fluid etc.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 4" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 833.30 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Modle - FTMS
Fluid Tech Systems offers “ROTOFLUID” brand gear pump Model “FTMS” which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTMS” having all stainless steel (SS-316) in four piece construction with investment cast. Due to four piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined SS-316 gear shaft that are nitrated to give longer life. Due to Double halical gear it prevent axial and side thrust which help to increase life & performance of pump. The teflon coated dry running bush bearing, supported on bronze wearing plate, placed inside the pump casing, alternatively bronze wearing plate cum bushes can also be provided for thicker viscous liquid application. The stuffing box is fitted with “GFO” pack sealant with provision to fit mechanical shaft seal. These pumps provide with add-on type pressure relief valve. The jacketing construction should be selected to facilitate the heating of the pump by steam or thermic fluid etc.

These pumps having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 13 LPM to 1335 LPM flow capacity. These pumps are suitable for maximum temperature up to 200ºc and maximum viscosity up to 1,00,000 SSU.
Model – FTM
All feature are same as FTMS but there are the following changes :
Casing : available in C.I. and WCB casting.
Shaft : available in SS 316, EN-9, EN-36 and SAE 8620.
Gear : available in SS 316 and EN-24 H. nitride.

Product Details:

Model – FTSS
Fluid Tech Systems offer “ROTOFLUID” make gear pump Model “FTSS” which is self priming, foot mounting type positive displacement rotary gear pump. Model “FTSS” having all Stainless Steel (SS-316) in three piece construction with investment cast. Due to three piece construction, it can be easily cleanable and maintainable that is why it is highly used in all kind of food industries. These pumps have SS-316 Gear and shaft that are nitrated to give long life and trouble free performance. The shaft is supported on self lubricating type Teflon coated Bushes and the sealing is done with Teflon based “GFO” pack sealant which gives zero leakage. The right angle mounting brackets facilitates foot mounting of the pump on base plate with Electric Motor of appropriate ratings. These pumps have sturdy design and construction for long trouble free service.

The suction and delivery connection are available in 1/4" to 2 ½" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.33 LPM to 300 LPM flow capacity and has suction lift of 1m to 5m at rated speed of 1440 RPM. These pumps are designed up to maximum Viscosity of 1,00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model - FTMS
Fluid Tech Systems offers “Rotofluid” brand gear pump Model “FTMS” which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTMS” having all stainless steel (SS-316) in four piece construction with investment cast. Due to four piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined SS-316 gear shaft that are nitrated to give longer life. Due to Double halical gear it prevent axial and side thrust which help to increase life & performance of pump. The teflon coated dry running bush bearing, supported on bronze wearing plate, placed inside the pump casing, alternatively bronze wearing plate cum bushes can also be provided for thicker viscous liquid application. The stuffing box is fitted with “GFO” pack sealant with provision to fit mechanical shaft seal. These pumps provide with add-on type pressure relief valve. The jacketing construction should be selected to facilitate the heating of the pump by steam or thermic fluid etc.

These pumps having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 13 LPM to 1335 LPM flow capacity. These pumps are suitable for maximum temperature up to 200ºc and maximum viscosity up to 1,00,000 SSU.

Product Details:

Fluid Tech Systems offers “rotofluid” make gear pump Model “FTMS” which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTMS” having all stainless steel (SS-316) in four piece construction with investment cast. Due to four piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined SS-316 gear shaft that are nitrated to give longer life. Due to Double halical gear it prevent axial and side thrust which help to increase life & performance of pump. The teflon coated dry running bush bearing, supported on bronze wearing plate, placed inside the pump casing, alternatively bronze wearing plate cum bushes can also be provided for thicker viscous liquid application. The stuffing box is fitted with “GFO” pack sealant with provision to fit mechanical shaft seal. These pumps provide with add-on type pressure relief valve. The jacketing construction should be selected to facilitate the heating of the pump by steam or thermic fluid etc.

These pumps having flange at the end of suction and delivery which are available in ½" to 4" size. These pumps can be operated up to pressure of 10 kg/cm² with 13 LPM to 500 LPM flow capacity. These pumps are suitable for maximum temperature up to 200ºc and maximum viscosity up to 1,00,000 SSU.

Product Details:

Model - FTRB
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
@ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

@ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

@ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Shop solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Product Details:

Model - FTBX
Fluid Tech Systems offer "ROTOFLUID" brand gear pump Model "FTNX/FTBX" which is heavy duty flange and foot mounting type positive displacement rotary gear pump. Model "FTNX/FTBX" is modified version of Model "FTRN/FTRB" to achieve high pressure. These pumps having doubled helical finished gears and hardened & ground shafts. Due to double helical gear it prevent axial load and side thrust which help to increase life and performance of pump. Model "FTBX" is a bush bearing type pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty; however for continuous duty pump have needle roller bearing in Model "FTNX" and it will be selected for liquid having low viscosity, power lubricating values.

In these pumps size 1/2" to 2 1/2" are provided with thread at end of suction & delivery and they are available with foot or flange mounting, But in size 3" to 4" are provided with flange at the end of suction & delivery and they are available with foot mounting only. These pumps can be operated up to pressure of 20 kg/cm2 with 5.0 LPM to 900 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200 degreeC.

Product Details:

Model - FTRB
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
@ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

@ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

@ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Shop solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Product Details:

Modle - FTMP
Fluid Tech Systems offers “ROTOFLUID” brand gear pump Model “FTMP” which is compact size and flange mounting type positive displacement Trochoid gear pump. The design of the pump is geroter based. Due to accuracy of the geroters, the whole pump assembly becomes compact and absolutely free from any noise. Based on mounting, these pump are made of flange type. These pumps are widely used where minimum flow of liquid is required.

As per the rate of delivery, there are eight size available. These pumps can be operated up to pressure of 10 kg/cm² with 0.5 LPM to 40 LPM flow capacity and viscosity range 10 to 1000 CST. The delivery rate is given in LPM at 1440 RPM of the shaft. These can be run in the range of 100 to 200 RPM and maximum temperature 80ºc.
FTMP Monoblock pump
Simple and compact designs of Monoblock pumps are available in this model.
Monoblock version is very easy to portable one to another place and it does not require to align every time when coupled with electric motor. Monoblock version save space and reduces down time. Compact and good finish monoblock pump assembly motor makes it a noiseless proposition.

Product Details:

Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
@ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

@ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

@ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Shop solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Product Details:

Model FTRBJ

Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model – FTBX /FTNX

Fluid Tech Systems offer “rotofluid” make gear pump Model “FTNX/FTBX” which is heavy duty flange and foot mounting type positive displacement rotary gear pump. Model “FTNX/FTBX” is modified version of Model “FTRN/FTRB” to achieve high pressure. These pumps having doubled helical finished gears and hardened & ground shafts. Due to double helical gear it prevent axial load and side thrust which help to increase life and performance of pump. Model “FTBX” is a bush bearing type pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty; however for continuous duty pump will needle roller bearing in Model “FTNX” and it will be selected for liquid having low viscosity, power lubricating values.

Product Details:

Model - FTRB
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
@ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

@ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

@ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Shop solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Product Details:

Modle - FTRN
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
@ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

@ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

@ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Shop solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Product Details:

Model – FTRN-FTRB-FTRX
Fluid Tech Systems offer “rotofluid” make gear pump Model “FTRN/FTRB” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which it help to increase life and performance of pump. Model “FTRB” is a bush bearing type of pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty, however for continuous duty, needle roller bearing in Model “FTRN” and it will be selected for liquid having low viscosity, power lubricating values if liquid containing dirt or impurities pump will independently lubricated bearing should be selected in Model 'FTRX', liquid which tends to solidity at lower temperature the jacketing construction should be selected to facilitate the heating of the pump lay steam or thermic fluid etc.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 4" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 833.30 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model – FTRN-FTRB-FTRX

Fluid Tech Systems offer “rotofluid” make gear pump Model “FTRN/FTRB” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which it help to increase life and performance of pump. Model “FTRB” is a bush bearing type of pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty, however for continuous duty, needle roller bearing in Model “FTRN” and it will be selected for liquid having low viscosity, power lubricating values if liquid containing dirt or impurities pump will independently lubricated bearing should be selected in Model 'FTRX', liquid which tends to solidity at lower temperature the jacketing construction should be selected to facilitate the heating of the pump lay steam or thermic fluid etc.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 4" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 833.30 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Rotary Lobe Pump

We are leading manufacturing of  "ROTOFLUID" Rotary Gear Pumps in india. 

Additional Information:

• Production Capacity: 200 Pumps
• Delivery Time: 4 to 5 Weeks

Product Details:

Model - FTMB
Fluid Tech Systems offers “ROTOFLUID” brand gear pump Model “FTMB” which is pre-lubrication motorized type positive displacement rotary gear pump that is why it is called Monoblock rotary gear pump. The design of the pump consider spacing saving in on elegant outlook. These pumps are with single helical, refined gear pair and hardened and grind finished shaft. The stuffing box is relieved to suction to prevent any pressure built ups to avoid leakages through shafts. The motorized pumps set in monoblock design ensure perfect alignments and saves space & reduces down time. The suction and delivery connection are available in 1/2", 3/4" and 1" size. These pumps can be operated up to pressure of 10kg/cm² with maximum temperature up to 80ºC.

Additional Information:

• Item Code: FTMB
• Production Capacity: 100
• Delivery Time: Ready Stock

Product Details:

Model - FTRN
Fluid Tech Systems offer “Rotofluid” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
@ Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

@ Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

@ Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Shop solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Product Details:

Model – FTRBJ

Fluid tech systems offer “rotofluid” make gear pump model “FTRN/FTRB” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which it help to increase life and performance of pump. Model “FTRB” is a bush bearing type of pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty, however for continuous duty, needle roller bearing in Model “FTRN” and it will be selected for liquid having low viscosity, power lubricating values if liquid containing dirt or impurities pump will independently lubricated bearing should be selected in Model 'FTRX', liquid which tends to solidity at lower temperature the jacketing construction should be selected to facilitate the heating of the pump lay steam or thermic fluid etc.

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 4" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 833.30 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model – FIG

Fluid Tech Systems offer “ROTOFLUID” make internal gear pump Model “FIG” which is high precision and fuel pressuring type positive displacement internal gear pump which prepared by graded cast iron. These nitrated gear , shafted rotor give better performance with closed tolerance to give long life. Model “FIG” is flange mounted. These pumps are self priming type produces maximum, vacuum determined by the cavity between the gear teeth. These pumps modified profile teeth cutting to give accurate capacity with in the pressure range. These pumps are capable to run liquid up to 500 CST viscosity and up to temperature 200ºc. The sealing is done with mechanical seal to ensure zero leakage.

The suction and delivery connections are available in 3/8",1/2",3/4"and 1" size. Model “FIG” pump come in a capacity Range of 150 LPH to 6000 LPH with operating pressure up to 35 kg/cm², yet for continuous duty maximum recommended pressure is 30kg/cm². These pumps can also be used at 2800 RPM. The capacity will have approx double of normal duty condition. These pump can be run both clock and anti clock direction as per requirement.

Product Details:

Modle - FTSS
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTSS” which is self priming, foot mounting type positive displacement rotary gear pump. Model “FTSS” having all Stainless Steel (SS-316) in three piece construction with investment cast.Due to three piece construction, it can be easily cleanable and maintainable that is why it is highly used in all kind of food industries. These pumps have SS-316 Gear and shaft that are nitrated to give long life and trouble free performance. The shaft is supported on self lubricating type Teflon coated Bushes and the sealing is done with Teflon based “GFO” pack sealant which gives zero leakage. The right angle mounting brackets facilitates foot mounting of the pump on base plate with Electric Motor of appropriate ratings. These pumps have sturdy design and construction for long trouble free service.

The suction and delivery connection are available in 1/4" to 2 ½" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.33 LPM to 300 LPM flow capacity and has suction lift of 1m to 5m at rated speed of 1440 RPM. These pumps are designed up to maximum Viscosity of 1,00,000 SSU and maximum temperature up to 200ºc.

Product Details:

Modle - FIG
Fluid Tech Systems offer “ROTOFLUID” brand internal gear pump Model “FIG” which is high precision and fuel pressuring type positive displacement internal gear pump which prepared by graded cast iron. These nitrated gear , shafted rotor give better performance with closed tolerance to give long life. Model “FIG” is flange mounted. These pumps are self priming type produces maximum, vacuum determined by the cavity between the gear teeth. These pumps modified profile teeth cutting to give accurate capacity with in the pressure range. These pumps are capable to run liquid up to 500 CST viscosity and up to temperature 200ºc. The sealing is done with mechanical seal to ensure zero leakage.

The suction and delivery connections are available in 3/8",1/2",3/4"and 1" size. Model “FIG” pump come in a capacity Range of 150 LPH to 6000 LPH with operating pressure up to 35 kg/cm², yet for continuous duty maximum recommended pressure is 30kg/cm². These pumps can also be used at 2800 RPM. The capacity will have approx double of normal duty condition. These pump can be run both clock and anti clock direction as per requirement.

Product Details:

Model FTX

Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTX” which is most efficient and economic range of flange and foot mounting type positive displacement rotary gear pump. Model “FTX” having Single helical shrink fitted gear pair and hardened and grind finished shaft. Ultra bronze sintered bushes ensured smooth running. It is perfectly designed and construction which increase life of pump and performance of pump.

The suction and delivery connections are available in 1/4" to 1 ½" size. These pumps can be operated up to pressure of 10 kg/cm² with 2.5 LPM to 125 LPM flow capacity. These pumps are designed to run at 1440 RPM and suitable liquid up to viscosity of 50,000 SSU and maximum temperature up to 200ºc.

Product Details:

Additional Information:

• Production Capacity: 1000 Per month
• Delivery Time: Ready stock

Product Details:

Additional Information:

• Production Capacity: 1000 per month
• Delivery Time: 1 week

Product Details:

Model – FT

Fluid tech systems offer “rotofluid” make gear pump model “ft” which is self priming, foot mounting type positive displacement rotary gear pump. Model “ft” having simple two pieces cast iron construction which is single helical modified profile carton steel gear shrink fitted on alloy steel hardened and grind finished shaft as gear firmly supported 4 nos. Of self lubricated sintered bronze bush bearing which ensure smooth running. These pumps can be run in either direction with change in inlet-outlet port position. The relief valve operations can be reversed by simply changing the r. V. Parts on opposite side.

The suction and delivery connections are available in 1/4" to 3" sizes. These pumps can be operated up to pressure of 10 kg/cm² with 5 LPM to 500 LPM flow capacity. These pumps are designed to run at 1440 rpm up to viscosity of 50, 000 ssu and maximum temperature up to 200ºc. It is desirable to reduce speed for size above 1½" performance at low speed is always advantageous as it improves efficiency, reduce noise level and enhances operational life. The capacity will reduce in proportion to the speed.

Product Details:

Model – FT

1/4" X 1/4" Pump

Fluid tech systems offer “rotofluid” make gear pump model “ft” which is self priming, foot mounting type positive displacement rotary gear pump. Model “ft” having simple two pieces cast iron construction which is single helical modified profile carton steel gear shrink fitted on alloy steel hardened and grind finished shaft as gear firmly supported 4 nos. Of self lubricated sintered bronze bush bearing which ensure smooth running. These pumps can be run in either direction with change in inlet-outlet port position. The relief valve operations can be reversed by simply changing the r. V. Parts on opposite side.

The suction and delivery connections are available in 1/4" to 3" sizes. These pumps can be operated up to pressure of 10 kg/cm² with 5 LPM to 500 LPM flow capacity. These pumps are designed to run at 1440 rpm up to viscosity of 50, 000 ssu and maximum temperature up to 200ºc. It is desirable to reduce speed for size above 1½" performance at low speed is always advantageous as it improves efficiency, reduce noise level and enhances operational life. The capacity will reduce in proportion to the speed.

Product Details:

Model – FTGM

Fluid Tech Systems offer “rotofluid” make gear pump Model “FTGM” which is specially design for paints. Model “FTGM” having bronze cast construction of pump casing and SS 316 construction of gear & shaft, that are nitrated to give long life and trouble free performance. Construction of gear is double helical which prevent axial load and side thrust. The sealing is done with “GFO” pack Teflon which gives zero leakages.

The suction & delivery connection are available in 1" only. These pump operate up to maximum pressure of 10 kg/cm² with maximum temperature up to 200°c.

Product Details:

Model – FIG

Fluid tech systems offer “rotofluid” make internal gear pump model “fig” which is high precision and fuel pressuring type positive displacement internal gear pump which prepared by graded cast iron. These nitrated gear , shafted rotor give better performance with closed tolerance to give long life. Model “fig” is flange mounted. These pumps are self priming type produces maximum, vacuum determined by the cavity between the gear teeth. These pumps modified profile teeth cutting to give accurate capacity with in the pressure range. These pumps are capable to run liquid up to 500 cst viscosity and up to temperature 200ºc. The sealing is done with mechanical seal to ensure zero leakage.

The suction and delivery connections are available in 3/8", 1/2", 3/4"and 1" size. Model “fig” pump come in a capacity range of 150 LPH to 6000 LPH with operating pressure up to 35 kg/cm², yet for continuous duty maximum recommended pressure is 30kg/cm². These pumps can also be used at 2800 rpm. The capacity will have approx double of normal duty condition. These pump can be run both clock and anti clock direction as per requirement

Product Details:

Model-FTMP Monoblock

Fluid Tech Systems offers “ROTOFLUID” brand gear pump Model “FTMP” which is compact size and flange mounting type positive displacement Trochoid gear pump. The design of the pump is geroter based. Due to accuracy of the geroters, the whole pump assembly becomes compact and absolutely free from any noise. Based on mounting, these pump are made of flange type. These pumps are widely used where minimum flow of liquid is required.

As per the rate of delivery, there are eight size available. These pumps can be operated up to pressure of 10 kg/cm² with 0.5 LPM to 40 LPM flow capacity and viscosity range 10 to 1000 CST. The delivery rate is given in LPM at 1440 RPM of the shaft. These can be run in the range of 100 to 200 RPM and maximum temperature 80ºc.

Product Details:

Fluid Tech Systems offer “ROTO FLUID” brand gear pump Model “FTGM” which is specially design for paints. Model “FTGM” having bronze cast construction of pump casing and SS 316 construction of gear & shaft, that are nitrated to give long life and trouble free performance. Construction of gear is double helical which prevent axial load and side thrust. The sealing is done with “GFO” pack Teflon which gives zero leakages

The suction & delivery connection are available in 1" only. These pump operate up to maximum pressure of 10 kg/cm² with maximum temperature up to 200°c.

 

Product Details:

Model – FTX

Fluid tech systems offer “rotofluid” make gear pump model “ftx” which is most efficient and economic range of flange and foot mounting type positive displacement rotary gear pump. Model “ftx” having single helical shrink fitted gear pair and hardened and grind finished shaft. Ultra bronze sintered bushes ensured smooth running. It is perfectly designed and construction which increase life of pump and performance of pump.

The suction and delivery connections are available in 1/4" to 1 ½" size. These pumps can be operated up to pressure of 10 kg/cm² with 2.5 LPM to 125 LPM flow capacity. These pumps are designed to run at 1440 RPM and suitable liquid up to viscosity of 50,000 SSU and maximum temperature up to 200ºc.

Product Details:

Model - FTNX,
Fluid Tech Systems offer "ROTOFLUID" brand gear pump Model "FTNX/FTBX" which is heavy duty flange and foot mounting type positive displacement rotary gear pump. Model "FTNX/FTBX" is modified version of Model "FTRN/FTRB" to achieve high pressure. These pumps having doubled helical finished gears and hardened & ground shafts. Due to double helical gear it prevent axial load and side thrust which help to increase life and performance of pump. Model "FTBX" is a bush bearing type pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty; however for continuous duty pump have needle roller bearing in Model "FTNX" and it will be selected for liquid having low viscosity, power lubricating values.

In these pumps size 1/2" to 2 1/2" are provided with thread at end of suction & delivery and they are available with foot or flange mounting, But in size 3" to 4" are provided with flange at the end of suction & delivery and they are available with foot mounting only. These pumps can be operated up to pressure of 20 kg/cm2 with 5.0 LPM to 900 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200degreeC.

Product Details:

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Model - FIG
Fluid Tech Systems offer “ROTOFLUID” brand internal gear pump Model “FIG” which is high precision and fuel pressuring type positive displacement internal gear pump which prepared by graded cast iron. These nitrated gear , shafted rotor give better performance with closed tolerance to give long life. Model “FIG” is flange mounted. These pumps are self priming type produces maximum, vacuum determined by the cavity between the gear teeth. These pumps modified profile teeth cutting to give accurate capacity with in the pressure range. These pumps are capable to run liquid up to 500 CST viscosity and up to temperature 200ºc. The sealing is done with mechanical seal to ensure zero leakage.

The suction and delivery connections are available in 3/8",1/2",3/4"and 1" size. Model “FIG” pump come in a capacity Range of 150 LPH to 6000 LPH with operating pressure up to 35 kg/cm², yet for continuous duty maximum recommended pressure is 30kg/cm². These pumps can also be used at 2800 RPM. The capacity will have approx double of normal duty condition. These pump can be run both clock and anti clock direction as per requirement.

Product Details:

Model – FTX

Fluid Tech Systems offer “ROTOFLUID” make gear pump Model “FTX” which is most efficient and economic range of flange and foot mounting type positive displacement rotary gear pump. Model “FTX” having Single helical shrink fitted gear pair and hardened and grind finished shaft. Ultra bronze sintered bushes ensured smooth running. It is perfectly designed and construction which increase life of pump and performance of pump.

The suction and delivery connections are available in 1/4" to 1 ½" size. These pumps can be operated up to pressure of 10 kg/cm² with 2.5 LPM to 125 LPM flow capacity. These pumps are designed to run at 1440 RPM and suitable liquid up to viscosity of 50,000 SSU and maximum temperature up to 200ºc.